SWG-2 Tube and Pipe Bending Machine Hydraulic with Wheels for Pipes 1/2′′-2′′

• Customization: Available
• After-sales Service: Yes
• Type: Hydraulic Pipe and Tube Bending Machine
• Model NO.: SWG-2
• Automation: Manual
• Applicable Material: Stainless Steel
• Applicable Shape: Round
• Warranty: 1 Year
• Force: 16t
• Working Range: 250mm
• Thickness: 2.75-5 mm
• Application: Bending Pipes
• Operation Mode: Manual
• Driving Force: Hydraulic
• Transport Package: Wooden Case
• Specification: 73*32*20 cm
• Trademark: E-Work
• Origin: Henan, China
• Production Capacity: 200 Per Month
• Package Size: 73.00cm * 32.00cm * 20.00cm
• Package Gross Weight: 48.000kg
• Lead Time: 10 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Product Description

The pipe bending machines of SWG series are used for bending pipes, especially the common water pipes, carbon steel pipes, thick-walled conduit tubes, and the steel tubes that have low pressure to deliver liquid in cold environment. This pipe bending machine can be applied in building, petrol, mines and shipbuilding industries.

There are two types of pipe bending machine, i.e., the manual type and the electric type. The models of hand operated pipe cutter include SWG-1, SWG-2, SWG-3, SWG-4, and SWG-5, while the the electric driven pipe cutter include DWG-1, DWG-2, DWG-3, DWG-4 and DWG-5. The above-mentioned former models are portable because they are equipped with wheels. The automatic models work fast because they are equipped with a pump. The applicable sizes of pipes ranges from 1/4 to 5 inches.

The bending angle of this SWG portable hydraulic bending machine could be 90 degrees at most, The molds are made of strong nodular cast iron, which is of higher strength, plasticity and durability, compared to the normal cast iron. They are designed for bending of common water pipes, conductor pipes, gas pipes, thick-walled steel pipes, and so on.

Product Features

1. Compact size

It is portable due to its light weight and it takes up little space.

2. With a long service life

It is made of strong metal with advanced coating, which is able to assure a longer lifespan.

3. Better leverage

The handle covered with rubber allows for better leverage and eases the bending process.The extendable lever will increase the pressure that you apply to the metal.

4. Able to bend pipes of different specifications

With various half-round bending molds, it is capable of making different bends on flat, square as well as solid round stock.

5. Corrosion resistant

It is made of high quality carbon steel and aluminum alloy, making it durable and corrosion-resistant.

6. With wide application

It can be widely used in building industry, chemical plant, central heating, shipping, machine manufacturing, house decorating, construction sites, garage and repair shop.

Product Details

1. Moulds of different sizes

It is time-saving and labor-saving, since that it can quickly bend the pipes of different types with its , without repeating bending.

2. High and low pressure plunger

It is accurate at slow stroke with its high pressure plunger, while it is labor-saving at rapid stroke with its high pressure plunger.

3. Port

The part which is connected to the pipe mouth is thickened. The edge is polished and smooth.

4. Adjustable column

The column is adjustable. The bending degree of the pipes needing to be bent can be adjusted.

5. Relief valve switch

Clockwise rotating is for screwing down, while anticlockwise rotating is for loosening.

6. Moulds made of nodular cast iron

The moulds are made of nodular cast iron, which is of high strength, plasticity and strong toughness, compared to the normal grey cast iron.

7. Exhaust screw

One must loosen this exhaust screw. Otherwise, oil leakage shall happen to the grease seal.

 

 

Product Parameters

Model	SWG-1	SWG-2	SWG-3	SWG-4	SWG-5
Force	10T	16T	18T	21T	21T
Work range	170mm	250mm	320mm	420mm	420mm
Wall thickness (mm)	2-3.5	2.75-5	2.75-6	2.75-6	2.75-6
Weight (kg)	20	48	98	137	186
Material of the mould	Nodular cast iron
Mould Configured	SWG-1	13mm/16mm/19mm/22mm/28mm/34mm
	SWG-2	22mm/28mm/34mm/42mm/48mm/60mm
	SWG-3	22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm
	SWG-4	22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm/108mm
	SWG-5	22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm/108mm/114mm

Packaging & Shipping

Company Profile

Henan E-Work Industrial Equipment Co., Ltd., which is established in 2013 and located at Zhengzhou Airport Economy Zone in Zhengzhou, the provincial capital of Henan Province in central China, is devoted to R&D, manufacturing and marketing of pipeline cold cutting tools, pipeline squeezing tool with pressure, etc., and providing professional service in respect of pipeline construction, detection and relevant systematic solutions.

Aiming at "Being a pipeline processing expert" and "Making work easier and more efficient", E-Work keeps investing in product design and technological innovation, which makes it possible for E-Work to take the lead in the industry of cold cutting tools. With outstanding quality and efficient performance, our self-developed pipeline cold cutting tools are deeply accepted and widely used by companies such as CNPC, Sinopec, CHINA RES GAS, XinAo Gas, etc.

Our company not only has skilled staff, but also has established strict quality management system and fine after-sales service system. The company performs scientific management and technological innovation.

We promise to provide customers with word-class products, and we sincerely look forward to cooperating with the customers from all over the world.