| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Type: | Hydraulic Pipe and Tube Bending Machine |
|
Still deciding? Get samples of US$ 420/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The pipe bender is suited for bending welding steel tubes that have low pressure to deliver liquid in a cold situation. It is also suited for bending common water pipes; carbon steel pipes and thick-wall conduit tubes. It is not suited for bending steel pipe with different diameters and colored metal pipe. The machine can be used in buildings, Petrol, mines, and the shipbuilding industry.
| Model No | Bending Pipe Size | Pipe Wall Thickness | Output | Stroke | Bending Dies | Motor Power | Machine Weight | Machine Shipping Weight | Pump weight (Net/Gross) | Oil Hose Length | Machine Packaing Size | Pump Packaging Size |
| DWG-1 | 1/4"-1" | 2-3.5mm | 10T | 170mm | 13mm/16mm/19mm/22mm/28mm/34mm | 750W | 17KG | 39KG | 19/22KG | 2M | 49*25*15CM | 35*27*49CM |
| DWG-2 | 1/2"-2" | 2.75-5mm | 16T | 250mm | 22mm/28mm/34mm/42mm/48mm/60mm | 750W | 40KG | 62KG | 19/22KG | 2M | 73*32*20CM | |
| DWG-3 | 1/2"-3" | 2.75-6mm | 18T | 320mm | 22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm | 750W | 86KG | 108KG | 19/22KG | 2M | 94*40*21CM | |
| DWG-4 | 1/2"-4" | 2.75-6mm | 21T | 420mm | 22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm/108mm | 750W | 129KG | 151KG | 19/22KG | 2M | 118*46*25CM | |
| DWG-5 | 1/2"-5" | 2.75-6mm | 21T | 420mm | 22mm/28mm/34mm/42mm/48mm/60mm/75.5mm/89mm/108mm/114mm | 750W | 178KG | 200KG | 19/22KG | 2M | 118*46*25CM |
· The molds are made of ductile iron
High strength, good toughness, and plasticity, higher strength than ordinary gray cast iron
· Bend pipe interface
Thickened design with smooth edges and joints with curved nozzles
· Adjustment column
Adjust the bending amplitude of the bent object
· The maximum bending angle of the whole system is 90°
Unable to bend non-metallic pipe, unable to bend square pipe
· High and low-pressure plunger
Drop plastic stroke speed is slow, high-speed stroke speed is fast
1. Turn the switch tightly in a clockwise direction.
2. Loosen the bolt.
3. Add lubrication to the mold and the pipe.
4. Choosing the corresponding mold base on the size of the pipe, set the mold on the top of actuating rod. Then insert the rocker on the nether molding board. Put the pipe, turn two rockers, and make the groove point to the mold.
5. Turn back the upper mounding board; shake the handle of the pump to make the mold press the pipe, bending the pipe until the angle is shaped.
6. After bending, loosen the switch anti-clockwise. The actuating rod would be back automatically. Open the upper molding board, and get out the pipe.
Detailed photos of Packing for Electro-hydraulic pipe bending machine
){kind=link}